Welcome to the official website of China Kaiqian Oil Purifier Manufacture Co.,Ltd
Language: ChineseEnglishEnglish

You Are Here: Home > OIL PURIFIER > Turbine Oil Purifier

Turbine Oil Purifier

TY-Q Series Turbine Oil Purification Machine

    Model: TY-Q20、TY-Q30、TY-Q50、TY-Q80、TY-Q100、TY-Q150、TY-Q200、TY-Q300

    Flow Rate: 20L/min、30L/min、50L/min、80L/min、100L/min、150L/min、200L/min、300L/min

    Work vacuum:-0.08~0.096 MPa

    Work pressure: ≤0.5 MPa

    Work temperature: ≤20-80℃ Adjustable

    Power supply:380-480V/50-60Hz Three-phase four-wire(Customizable as required)

    Heating power:24KW、30KW、36KW、42KW、48KW、54KW、60KW、72KW

    Total power: 26KW、33KW、39KW、46KW、53KW、66KW、74KW、84KW


  • FEEDBACK

  Ⅰ. TY-Q Series Vacuum Turbine Oil Purifier Usage

  The machine Suitable for turbine oil turbine unit, hydraulic turbine unit, online or offline working can purifier Undegraded oil,TY-Q series turbine oil high vacuum oil purifier machine , The machine was equipped with precision filtration, vacuum drying, coalescence separation and three - dimensional spiral atomization technology, after the treatment, the gas, moisture,acid, foaming in the emulsified oil will become clear and meet the using standard.They are widely used in electric power, chemical industry, paper-making, petroleum and other industries. Can effectively ensure the safe operation of steam turbine lubrication system.

turbine oil purification

  Ⅱ. TY-Q Series Vacuum Turbine Oil Purifier Working Principle

  The machine used vacuum separation and precision mechanical purifier principle, adopt molecular adsorption, vacuum drying, mechanical filtration and many other technologies, the lubricant vacuum purifier machine is a complete machine without any attached mechanical equipment. Used different saturated temperature curve vacuum drying principle between water and oil, can high-efficient separation waster and oil , and deep precise filtration theory.

  Ⅲ. TY-Q Series Vacuum Turbine Oil Purifier Working Process

  the oil goes through the first filtration and enters into the heating device, after heating, it goes into the second filtration and enters into the spiral spray atomization system. The insulating oil fall into the reaction tower when it becomes coarse particle and enters into the vacuum separation chamber, then the water begins evaporating, the oil mist becomes into the evaporation structure with the three-dimensional, multi-level evaporating in the tank. It can purify the oil in a short time. the oil without impurities, moisture, gas and acid will go through a precision filter to complete a clean oil working cycle. the steam and hot air separated from vacuum chamber will go into the condensator, most of the moisture will become the water and storaged in the tank and drain out of the machine, the hot air will be cooled and exhaust from vacuum pump.

  Ⅳ. TY-Q Series Vacuum Turbine Oil Purifier Function.

  4.1 improve the cleanliness of lubricating system on Dilute Oil Station and oil tank, impurity and dewatering degassing and impurities removal.

  4.2 It can remove not only 100% free water and 99.9% dissolve water, but also 100% free gas and 98% dissolve gas, and the ends oil will meeting the national using standard.

  4.3 Advantage

  4.3.1 Application of the advanced technology at home and abroad on similar equipment, so our devices are in the leading position on oil purifier and equipment performance. with the characteristic of high vacuum in working, fast speed in oil purifier and the high precision, etc.

  4.3.2 It units the precision filter and high dehydration, applied the advanced vacuum coalescence separation technology, which with the high dehydration, high ability in purifying low viscosity light turbine oil, hydraulic oil, anti-wear hydraulic oil and gearbox oil. After the treating, the cleanness of medium will be promoted at level 6 ≥ DAS1638, the physical and chemical of the oil will keep the same, with higher lubricant effect, lower consumption, lower fee in working, better system setting, stronger continuous working ability and more suitable in online working.

  Ⅴ. Treated turbine oil parameters

Items

unit

Treatment parameter

est Method

Mechanical impurities

GB/T511

Demulsibility number

Min

≤15

GB/T7605

Moisture

Mg/L

≤50PPM

GB/T7600

Acid value

mgkoH/g

≤0.3

GB/T264

Cleanness-degree

Grade

≤6

NAS1638

Filter precision

≤3um

  TY-Q Series Vacuum Turbine Oil Purifier Technical parameters

model

item

unit

TY-Q20

TY-Q30

TY-Q50

TY-Q80

TY-Q100

TY-Q150

TY-Q200

TY-Q300

flow

L/min

20

30

50

80

100

150

200

300

working vacuum

Mpa

0.08~-0.096

working pressure

Mpa

≤0.5

working temperature

≤2080 freely adjustable

power

V

380-480V/50-60Hz Three-phase four-wireCustomizable as required

electrical

kw

24

30

36

42

48

54

60

72

total power

kw

26

33

39

46

53

66

74

84

inlet/outlet pipe

mm

Φ25

Φ32

Φ32

Φ42

Φ42

Φ48

Φ48

Φ60

weight

Kg

385

450

550

600

800

850

1000

1200

Dimension

L

mm

1350

1400

1450

1500

1550

1550

1700

1850


w

mm

850

950

1100

1100

1150

1150

1450

1450


H

mm

1600

1650

1700

1700

1750

1800

1850

1910

  Note: The outline dimensions and the product weight is updating according to the improving technical. Pls take the real product as standard.(We can manufacture this machine with customer’s demands, we offer the closed type, conceal eaves style and the trailer type.)




PRODUCT INQUIRY

Navigation

Our Company

Address:No.66 Kecheng Road,Jiulongpo District, Chongqing, China

Phone:0086 13983031725

Whatsapp:0086 13983031725

Email:oilpurification@kaiqiancq.com

WeChat public number