Ⅰ. Engine Oil Recycling Machine Application
Our vacuum distillation equipment is used for recycling base oil from used lubricant oil, contaminated hydraulic oil and black engine oil from 4S car stores etc.. It can regenerate and recycle base oil from all kinds of waste lubricating oil at high recovery rate with energy saving and environmental protection. Our vacuum distillation equipment and process are your first choice for waste oil regeneration and recycling!
Ⅱ. Engine Oil Recycling Machine Technology Principle
Our vacuum molecular distillation equipment adopts high vacuum distillation technology, atmospheric and vacuum technology to realize liquid-liquid separation by the difference of mean free path of molecular movement of different substances. The free path of molecular motion refers to the path between two adjacent collisions of a molecule. When the oil is heated, light and heavy molecules will overflow the liquid surface and enter the gas phase. Because the free path of light and heavy molecules is different, the molecules of different substances will move different distances after overflowing the liquid surface, so as to achieve the purpose of substance separation.The vacuum distillation technology not only speeds up the molecular overflow time, but also improves the oil yield.
Ⅲ.Engine Oil Recycling Machine Technology Advantages
3.1This machine can recycle black oil into yellow base oil, not only can effectively remove impurities, water, acid, gas, but also carbon granular substances and peroxides. Asphalt, colloids and other sludge in diesel oil can be similarly removed and deodorized.
3.2Waste oil distillation equipment has the advantages of high working efficiency and low refined oil cost. Other materials filtered out can also be used as fuel without causing secondary pollution, thus realizing environmental protection and energy saving.
3.3The equipment has complete environmental protection components, such as exhaust gas burner, flue dust removal chamber and circulating water treatment.
3.4 Advantages of atmospheric and vacuum continuous production process.
It can be divided into first-line oil, second-line oil and third-line oil.
The basic way is to divide the used oil into different straight-run distillation fractions according to the boiling point requirements of different products, and then remove the non-ideal components according to the product quality standard requirements, or through chemical reaction conversion, the required components can be generated, and then a series of qualified base oil products can be obtained.
3.5 The by-products such as tail oil, residual oil, light component oil and extraction oil can be sold as industrial fuel oil.
3.6 The process adopts solvent refining instead of sulfuric acid and clay, so there is no "waste residue" discharge.
3.7 The vacuum distillation equipment investment is less, equipment construction cycle is fast, product income is high.
Ⅳ. Vacuum Waste Engine Oil Distillation Equipment Main Product Index
4.1 The major product of used oil distillation and refining is base oil. The recovery rate of base oil mainly depends on the situation of the raw material( the used lubricant oil). Generally, the best is the used engine oil from 4S car shops, and the worst is marine ship diesel engine oil.
4.2 Generally, the product yield (calculated according to the raw material without water content) produced by this process is as follows:
4.2.1 Light industrial fuel oil 5-10%
4.2.2 Heavy industrial fuel oil 8-15%
4.2.3 Base oil 70-85%
4.2.4 The quality of the solvent-refined base oil meets the HVI 100SN,250SN and 350SN standards of CNPC (Q/SY44-2009) lubricating base oil.
Ⅴ. Vacuum Waste Engine Oil Recycling Machine Technical Parameters And Model No.s
Model designation | Unit | KTS-R2-5 | KTS-R15 | KTS-R20 | KTS-R30 | KTS-R50 | KTS-R100-200 | |||
Handling Capacity | T/D | 2-5 | 15 | 20 | 30 | 50 | 100-200 | |||
Working Pressure | Mpa | ≤0.5 | ||||||||
Working vacuum | pa | -5~ -20 | ||||||||
Temperature | ℃ | ≤350 | ||||||||
Working Noise | dB (A) | ≤85 | ||||||||
The power | V | 380-480V/50-60Hz Three-phase four-wire(Customizable as required) | ||||||||
Total Power | KW | 80 | 120 | 125 | 140 | 200 | 300-600 | |||
Cooling Water | M³ | 35 | 40 | 50 | 60 | 80 | ||||
Weight | T | 16 | 19 | 22 | 26 | 46 | ||||
Dimension | L | m | 15 | 17 | 17 | 25 | 45 | |||
W | m | 4 | 6.5 | 10 | 12 | 16 | ||||
H | m | 6 | 6 | 6 | 6 | 6.5 | ||||
Notification | 1.We can customize 150 -300TPD equipment as required 2.Diesel and natural gas heating method will be more economical. |
Customer site: