Welcome to the official website of China Kaiqian Oil Purifier Manufacture Co.,Ltd
Language: ChineseEnglishEnglish

You Are Here: Home > OIL PURIFIER > Hydraulic Oil Purifier

Hydraulic Oil Purifier

TY-G Series Hydraulic Oil Filtration Machine

    Model: TY-G20、TY-G30、TY-G50、TY-G80、TY-G100、TY-G150、TY-G200、TY-G300

    Flow Rate: 20L/min、30L/min、50L/min、80L/min、100L/min、150L/min、200L/min、300L/min

    Work vacuum:-0.08~0.096 MPa

    Work pressure: ≤0.5 MPa

    Work temperature: ≤10-80℃ Adjustable

    Power supply:380-480V/50-60Hz Three-phase four-wire(Customizable as required)

    Heating power:24KW、30KW、36KW、42KW、54KW、66KW、72KW、90KW

    Total power: 26KW、33KW、39KW、45KW、57KW、72KW、86KW、105KW


  • FEEDBACK

  Ⅰ. TY-G Series Hydraulic Oil Filtration Machine Usage

  The filtration system widely use in Automotive Manufacturing, Aluminum Industry, Iron and Steel, hydraulic Press, hydraulic Oil, Anti-wear hydraulic Oil, Compressor Oil, Frozen Oil, pump truck hydraulic Oil, Engineering vehicle hydraulic Oil, and other unqualified Lubricating Oil purifier . it is professional designed for all kinds of hydraulic oils, It can quickly remove impurities, moisture, gas, light hydrocarbon, acid value, improve the quality of oil, restore the unique performance of lubricating oil, and make the hydraulic oil emulsified seriously. Anti-wear hydraulic oil; after treatment becomes clear and transparent to ensure the operation of hydraulic system, power system, lubrication system.

  Ⅱ. TY-G Series Hydraulic Oil Filtration Machine Working Principle

  Vacuum hydraulic precision mechanical filtration, and taking use of molecular adsorption, vacuum drying, mechanical filtration, and many other technologies, without any affiliated equipment. Its three-dimensional and multi-level separation system take use of the theory of vacuum drying saturation temperature in oil and water, and also applied the multi-level, high throughput, and deep precisive filtration theory.

  Ⅲ. TY-G Series Hydraulic Oil Filtration Machine Working Process

  the oil goes through the first filtration and enters into the heating device, after heating, it goes into the second filtration and enters into the spiral spray atomization system. The insulating oil fall into the reaction tower when it becomes coarse particle and enters into the vacuum separation chamber, then the water begins evaporating, the oil mist becomes into the evaporation structure with the three-dimensional, multi-level evaporating in the tank. It can purify the oil in a short time. the oil without impurities, moisture, gas and acid will go through a precision filter to complete a clean oil working cycle. the steam and hot air separated from vacuum chamber will go into the condenser, most of the moisture will become the water and storage in the tank and drain out of the machine, the hot air will be cooled and exhaust from vacuum pump.

  Ⅳ. TY-G Series Vacuum Hydraulic Oil Purifier Function

  4.1 Improving the cleanness of hydraulic oil system anti-wear hydraulic system on Dilute Oil Station and fuel tank de-watering, degassing and impurities removal.

  4.2 Hydraulic oil filtration system can remove not only 100% free water and 99.9% dissolve water, but also 100% free gas and 98% dissolve gas, and the ends oil will meeting the national using standard.

  4.3 advantage of hydraulic oil vacuum purifier machine

  4.31 Application of the advanced technology at home and abroad on similar equipment, so our devices are in the leading position on oil purifier and equipment performance. with the characteristic of high vacuum in working, fast speed in oil purifier and the high precision, etc.

  4.32 It units the precisive filter and high dehydration, applied the advanced vacuum coalescence separation technology, which with the high dehydration, high ability in purifying low viscosity light turbine oil, hydraulic oil, antiwear hydraulic oil and gearbox oil. After the treating, the cleanness of medium will be promoted at level 6 ≥ DAS1638, the physical and chemical of the oil will keep the same, with higher lubricant effect, lower consumption, lower fee in working, better system setting, stronger continuous working ability and more suitable in online working.

  After treatment oil quality parameters

Item

Unit

Treatment parameter

Test Method

Mechanical impurities

GB/T511

Demulsibility number

Min

≤15

GB/T7305

 water

%

no

GB/T260

Cleanness-degree

grade

≤6

NAS1638

gas content

%

≤0.1

GB/T423

Filter precision

um

5-10

  TY-G Series Hydraulic Oil Filtration Machine Technical Parameters

model

item

unit

TY-G20

TY-G30

TY-G50

TY-G80

TY-G100

TY-G150

TY-G200

TY-G300

flow

L/min

20

30

50

80

100

150

200

300

working vacuum

Mpa

0.08~-0.096

working pressure

Mpa

≤0.5

working temperature

≤1080 freely adjustment

power

V

380-480V/50-60Hz Three-phase four-wireCustomizable as required

electric heating power

KW

24

30

36

42

54

66

72

90

total power

KW

26

33

39

45

57

72

86

105

inlet/outlet pipe

mm

Φ25

Φ32

Φ42

Φ42

Φ48

Φ48

Φ50

Φ60

weight

Kg

480

550

600

1050

1150

1450

1600

2200

dimension

L

mm

1150

1350

1400

1500

1550

1550

1600

1650


w

mm

910

1000

1100

1300

1350

1350

1400

1450


H

mm

1550

1600

1650

1750

1800

1850

1900

2000




PRODUCT INQUIRY

Navigation

Our Company

Address:No.66 Kecheng Road,Jiulongpo District, Chongqing, China

Phone:0086 13983031725

Whatsapp:0086 13983031725

Email:oilpurification@kaiqiancq.com

WeChat public number