Welcome to the official website of China Kaiqian Oil Purifier Manufacture Co.,Ltd
Language: ChineseEnglishEnglish

You Are Here: Home > OIL PURIFIER > Plate Frame Oil Purifier

Plate Frame Oil Purifier

Plate Pressure Oil Purifier

    Model: LY-30、LY-50、LY-80、LY-100、LY-150、LY-200

    Flow Rate: 30L/min、50L/min、80L/min、100L/min、150L/min、200L/min

    Power supply:380-480V/50-60Hz Three-phase four-wire(Customizable as required)

    motor power:0.75KW、1.1KW、1.5KW、2.2KW、3KW、4KW


  • FEEDBACK

Ⅰ. LY Plate Pressure Oil Purifier Usage

Plate pressure oil purifier are also called pressure oil filters and paper oil filters. The oil is transferred to the filter box by an oil pump, and then the oil is removed through a filter paper to remove impurities and water.

Ⅱ. Plate Pressure Oil Purifier Advantage

The plate pressure oil purifier uses treated filter paper as the filter material. In order to increase the filtering area, the paper on the filter paper is in the shape of a fan, the filtering accuracy is 5-30um, the pressure drop is (1 ~ 4) × 10 square pa, the safety factor is high, the plate-frame oil filter has reliable performance and is a hydraulic transmission system A widely used oil filter. However, the strength of the paper core is low, and it cannot be cleaned after clogging. The filter paper must be replaced. The relative cost of the filter paper is low, and it is easy to buy.

Ⅲ. Operating instructions for plate and frame oil purifier

Before use, firstly, you must check the installation position of filter plate and filter frame of filter part, starting from this end of thrust plate, the first plate is plate, the second plate is frame, the third plate is plate, and the fourth plate is frame, and so on, so forth. The number of plates is always one more than that of frames. The plates and frames can not be installed in the opposite direction. If they are installed in the opposite direction, they will not play a filtering role. The grease applied on the plate, frame, thrust plate and compression plate must be removed, and the primary filter must be cleaned at the same time. Before commissioning, filter paper must be clamped between the plates and frames to compress the plates and frames.

LY Plate Pressure Oil Purifier Technical Parameters

item

unit

LY-30

LY-50

LY-80

LY-100

LY-150

LY-200

rate flow

L/min

30

50

80

100

150

200

filter area

m2

0.7

0.9

1.2

1.5

2.0

2.4

filer pressure

Pa

2.5×105

oil viscosity

Cst

≤33

filter precision

μm

5

working noise

dB(A)

≤75

specification

mm

280×280     -     300×300

power

V

380-480V/50-60Hz Three-phase four-wireCustomizable as required

motor power

KW

0.75

1.1

1.5

2.2

3.0

4

inlet pipe

mm

20

25

25

32

40

40

outlet pipe

mm

20

25

25

32

40

40




PRODUCT INQUIRY

Navigation

Our Company

Address:No.66 Kecheng Road,Jiulongpo District, Chongqing, China

Phone:0086 13983031725

Whatsapp:0086 13983031725

Email:oilpurification@kaiqiancq.com

WeChat public number